DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module "A" Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message; DTC U0242-87: Lost Communication with Headlamp Control Module "B" Missing Message; DTC U0293-87: Lost Communication with Hybrid/EV Powertrain Control Module Missing Message; DTC U114F-87: Lost Communication with Power Integration Module Missing Message [11/2023 - ]: Description

2025 Toyota Highlander XLE, FWDSECTION Description

These DTCs are stored if a CAN communication malfunction occurs between the headlight ECU sub-assembly LH and other ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U0100-87 Lost Communication With ECM/PCM "A" Missing Message The headlight ECU sub-assembly LH does not receive data from the ECM for approximately 10 seconds or more. CAN communication system Headlight Control
U0101-87 Lost Communication with TCM Missing Message for HV Model: 
  1. The headlight ECU sub-assembly LH does not receive data from the hybrid vehicle control ECU for approximately 10 seconds or more.

for Gasoline Model: 

  1. The headlight ECU sub-assembly LH does not receive data from the TCM for approximately 10 seconds or more.
CAN communication system Headlight Control
U0126-87 Lost Communication with Steering Angle Sensor Module Missing Message The headlight ECU sub-assembly LH does not receive data from the steering sensor for approximately 10 seconds or more. CAN communication system Headlight Control
U0129-87 Lost Communication with Brake System Control Module "A" Missing Message for HV Model: 
  1. The headlight ECU sub-assembly LH does not receive data from the No. 2 skid control ECU (brake actuator assembly) for approximately 10 seconds or more.

for Gasoline Model: 

  1. The headlight ECU sub-assembly LH does not receive data from the skid control ECU (brake actuator assembly) for approximately 10 seconds or more.
CAN communication system Headlight Control
U0140-87 Lost Communication with Body Control Module Missing Message The headlight ECU sub-assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system Headlight Control
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message The headlight ECU sub-assembly LH does not receive data from the combination meter assembly for approximately 10 seconds or more. CAN communication system Headlight Control
U0242-87 Lost Communication with Headlamp Control Module "B" Missing Message The headlight ECU sub-assembly LH does not receive data from the headlight ECU sub-assembly RH for approximately 10 seconds or more. CAN communication system Headlight Control
U0293-87 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message The headlight ECU sub-assembly LH does not receive data from the hybrid vehicle control ECU for approximately 10 seconds or more. CAN communication system Headlight Control
U114F-87 Lost Communication with Power Integration Module Missing Message The headlight ECU sub-assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system Headlight Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.