Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed [12/2019 - ]: Description
For HV Model
- The forward recognition camera receives the vehicle information from the hybrid vehicle control ECU via CAN communication.
If the forward recognition camera cannot store the vehicle information sent from the hybrid vehicle control ECU, it stores DTC U0300-51.
For Gasoline Model
- The forward recognition camera receives the vehicle information from the ECM via CAN communication.
If the forward recognition camera cannot store the vehicle information sent from the ECM, it stores DTC U0300-51.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0300-51 | Internal Control Module Software Incompatibility Not Programmed | For HV Model
For Gasoline Model
|
Front camera system |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.