Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025HIGHLANDER XLE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEROAD SIGN ASSIST SYSTEM - DIAGNOSTIC CODESROAD SIGN ASSIST SYSTEMDTC U0100-87: LOST COMMUNICATION WITH ECM/PCM "A" MISSING MESSAGE; DTC U0101-87: LOST COMMUNICATION WITH TCM MISSING MESSAGE; DTC U0126-87: LOST COMMUNICATION WITH STEERING ANGLE SENSOR MODULE MISSING MESSAGE; DTC U0129-87: LOST COMMUNICATION WITH BRAKE SYSTEM CONTROL MODULE MISSING MESSAGE; DTC U0140-87: LOST COMMUNICATION WITH BODY CONTROL MODULE MISSING MESSAGE; DTC U0155-87: LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE MISSING MESSAGE; DTC U0163-87: LOST COMMUNICATION WITH NAVIGATION CONTROL MODULE MISSING MESSAGE; DTC U0293-87: LOST COMMUNICATION WITH HYBRID POWERTRAIN CONTROL MODULE MISSING MESSAGE [11/2023 - ]DESCRIPTION
2025 Toyota Highlander XLE, FWD
DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U0293-87: Lost Communication with Hybrid Powertrain Control Module Missing Message [11/2023 - ]: Description
2025 Toyota Highlander XLE, FWDSECTION Description
When a malfunction is detected between various ECUs and sensors, these DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0100-87 | Lost Communication with ECM/PCM "A" Missing Message | 3 seconds or more after the ignition switch is turned to ON, while the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U0101-87 | Lost Communication with TCM Missing Message | After 3 seconds or more have elapsed since turning the road sign assist system on and the ignition switch to ON, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU*1 or ECM*2 is continuously detected for 5 seconds or more. | CAN communication system |
| U0126-87 | Lost Communication with Steering Angle Sensor Module Missing Message | After 3 seconds or more have elapsed since turning the road sign assist system on and the ignition switch to ON, a communication malfunction between the forward recognition camera and the steering sensor is continuously detected for 5 seconds or more. | CAN communication system |
| U0129-87 | Lost Communication with Brake System Control Module Missing Message | 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the No. 2 skid control ECU (brake actuator assembly) *1 or skid control ECU (brake actuator assembly) *2 and the forward recognition camera is detected for approximately 5 seconds or more. |
CAN communication system |
| U0140-87 | Lost Communication with Body Control Module Missing Message | 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U0155-87 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more. | CAN communication system |
| U0163-87 | Lost Communication with Navigation Control Module Missing Message | After 3 seconds or more have elapsed since turning the road sign assist system on and the ignition switch to ON, a communication malfunction between the forward recognition camera and the navigation system is continuously detected for 5 seconds or more. | CAN communication system |
| U0293-87 | Lost Communication with Hybrid Powertrain Control Module Missing Message | After 3 seconds or more have elapsed sinceturning the road sign assist system on and the ignition switch to ON, a communication malfunction between the forward recognition camera and the hybrid vehicle control ECU is continuously detected for 5 seconds or more. | CAN communication system |
- *1: for HV Model
- *2: for Gasoline Model
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.