Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025HIGHLANDER HYBRID XLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 249 (BRAKE CONTROL SYSTEM - SERVICE INFORMATION)STEERING ANGLE SENSORREMOVAL [09/2021 - 11/2022]PROCEDURE
2025 Toyota Highlander Hybrid XLE
Removal [09/2021 - 11/2022]: Procedure
2025 Toyota Highlander Hybrid XLESECTION Procedure
WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, 2023 Toyota Corolla Cross, and 2022 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Refer to REMOVAL [09/2021 - 11/2022]
- REMOVE STEERING SENSOR NOTE:
Do not damage the claws or pins of the spiral cable sub-assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.