Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Customize Parameters [12/2019 - 09/2020]
- CUSTOMIZE LTA (w/ Lane Centering Function) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Multi-information Display
- Turn the ignition switch to ON.
- Select the setting by referring to the table below.
- Using the steering pad switches, change the customize settings.
HINT:
Each item is displayed on the "Setting" tab on the multi-information display.
LTADisplay Description Setting Default Lane Center Lane centering function setting On/Off Off Steering Assist Steering assist function setting On/Off On Sensitivity Lane departure alert timing High/Standard High Sway Warning Vehicle sway warning function setting On/Off On Sway Sensitivity* Sway warning sensitivity setting High/Standard/Low Standard *: Cannot be used
HINT:
Some LTA functions are operable only when other functions are enabled or operating. Refer to the following table.
Vehicle-to-vehicle Distance Control (With Full-speed Range Following Function) LTA Main Switch Steering Assist Lane Center Sway Warning Lane Departure Alert Function - ◦ - - - Steering Assist Function - ◦ ◦ - - Lane Centering Function • ◦ ◦ ◦ - Vehicle Sway Warning Function - - - - ◦ •: System/function operating◦: Turned/Set to On
- CUSTOMIZE LDA (w/o Lane Centering Function) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Multi-information Display
- Turn the ignition switch to ON.
- Select the setting by referring to the table below.
- Using the steering pad switches, change the customize settings.
HINT:
Each item is displayed on the "Setting" tab on the multi-information display.
LDADisplay Description Setting Default Steering Assist Steering assist function setting On/Off On Sensitivity Lane departure alert timing High/Standard High Sway Warning Vehicle sway warning function setting On/Off On Sway Sensitivity* Sway warning sensitivity setting High/Standard/Low Standard *: Cannot be used
HINT:
Some LDA functions are operable only when other functions are enabled or operating. Refer to the following table.
LDA Main Switch Steering Assist Sway Warning Lane Departure Alert Function ◦ - - Steering Assist Function ◦ ◦ - Vehicle Sway Warning Function - - ◦ ◦: Turned/Set to On
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.