Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC U0318-57: Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component [12/2019 - 09/2020]: Procedure
- CHECK FOR DTCs
- Check for electronically controlled brake system DTCs.
Chassis > Brake/EPB > Trouble Codes
Chassis > Brake Booster > Trouble Codes
Result
Result Proceed to Electronically controlled brake system DTCs are not output A Electronically controlled brake system DTCs are output B
Result:
A
REPLACE FORWARD RECOGNITION CAMERA. Refer to REMOVAL [12/2019 - 09/2020]
Result:
B
GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023]
- Check for electronically controlled brake system DTCs.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.