DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message; DTC U0293-87: Lost Communication with Hybrid Powertrain Control Module Missing Message; DTC U1106-87: Lost Communication with Electric Parking Brake Module Missing Message [11/2023 - ]: Description

2025 Toyota Highlander Hybrid XLESECTION Description

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U0126-87 Lost Communication with Steering Angle Sensor Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for 5 seconds or more. CAN communication system Radar Cruise 2
U0129-87 Lost Communication with Brake System Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and No. 2 skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Radar Cruise 2
U0155-87 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 5 seconds or more. CAN communication system Radar Cruise 2
U0293-87 Lost Communication with Hybrid Powertrain Control Module Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU and forward recognition camera is detected for 5 seconds or more. CAN communication system Radar Cruise 2
U1106-87 Lost Communication with Electric Parking Brake Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and parking brake ECU assembly continues for 5 seconds or more. CAN communication system Radar Cruise 2
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.