Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2025COROLLA CROSS L, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)STEERINGPOWER STEERINGPOWER STEERING SYSTEM - DIAGNOSTIC CODES & SYMPTOM TESTSPOWER STEERING SYSTEMDTC U0100-87: LOST COMMUNICATION WITH ECM/PCM "A" MISSING MESSAGE; DTC U0129-87: LOST COMMUNICATION WITH BRAKE SYSTEM CONTROL MODULE MISSING MESSAGE; DTC U023A-87: LOST COMMUNICATION WITH IMAGE PROCESSING MODULE "A" MISSING MESSAGE [09/2021 - 11/2022]DESCRIPTION
2025 Toyota Corolla Cross L, FWD
DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U023A-87: Lost Communication with Image Processing Module "A" Missing Message [09/2021 - 11/2022]: Description
2025 Toyota Corolla Cross L, FWDSECTION Description
The power steering ECU assembly receives signals from the steering sensor, skid control ECU (brake actuator assembly), forward recognition camera*1 and ECM via CAN communication.
- *1: w/ Toyota Safety Sense
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0100-87 | Lost Communication with ECM/PCM "A" Missing Message | Lost communication with ECM |
|
EPS warning light: Does not come on | After normal confirmation | - |
| U0129-87 | Lost Communication with Brake System Control Module Missing Message | Lost communication with skid control ECU (brake booster with master cylinder assembly) |
|
EPS warning light: Does not come on | After normal confirmation | - |
| U023A-87 | Lost Communication with Image Processing Module "A" Missing Message | Lost communication with forward recognition camera |
|
EPS warning light: Does not come on | After normal confirmation | w/ Toyota Safety Sense |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.