SYS.OK|MANUAL.DB● LIVE
2025 Toyota Corolla Cross Hybrid Nightshade

Quick Lookups: Fluids

2025 Toyota Corolla Cross Hybrid NightshadeSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Automatic Transmission Fluid Gas/Electric 3.90 QTS. 3.69 L Toyota Genuine e-Transaxle Fluid TE S
Brake Fluid N/A N/A SAE J1703 or FMVSS No. 116 DOT 3 SAE J1704 or FMVSS No. 116 DOT 4 S
Differential Gear Oil Gas/Electric,AWD Rear Axle 1.47 QTS. 1.39 L TOYOTA Genuine e-Transaxle Fluid Type TE S
Engine Coolant Gas/Electric Coolant System 6.40 QTS. 6.05 L TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology DO NOT use plain water alone. The fluid capacity is the quantity of reference. S
Engine Coolant Gas/Electric Power Control Unit 1.80 QTS. 1.7 L TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology DO NOT use plain water alone. The fluid capacity is the quantity of reference. S
Engine Oil Gas/Electric Drain and Refill,w/Filter 4.40 QTS. 4.16 L TOYOTA Genuine Motor Oil. ILSAC GF-6B SAE 0W-16 Multigrade Engine Oil If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. S
Engine Oil Gas/Electric Drain and Refill,w/o Filter 4.10 QTS. 3.88 L TOYOTA Genuine Motor Oil. ILSAC GF-6B SAE 0W-16 Multigrade Engine Oil If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. S
Fuel Tank Gas/Electric 10.60 GALS. 40.12 L S
Transfer Case Fluid 0.47 QTS. 0.44 L TOYOTA Genuine Differential Gear Oil LT, SAE 75W-85 GL-5 or equivalent S
Windshield Washer Fluid N/A N/A Washer Fluid In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.