Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal [12/2024 - ]: Procedure
2025 Toyota 4Runner SR5, RWDSECTION Procedure
- REMOVE INTAKE AIR TEMPERATURE SENSOR
- Disconnect the intake air temperature sensor connector.
- Using a 17 mm deep socket wrench, remove the intake air temperature sensor from the intercooler assembly.NOTE:
If the intake air temperature sensor has been struck or dropped, replace it.
- Remove the gasket from the intake air temperature sensor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.