Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC U0322-51: Software Incompatibility with Body Control Module Not Programmed [12/2024 - ]: Description
Forward recognition camera receives vehicle specification information from the main body ECU (multiplex network body ECU) via CAN communication line. If the forward recognition camera cannot confirm the vehicle specification information based on vehicle specification information sent from the main body ECU (multiplex network body ECU), the forward recognition camera stores DTC U0322-51.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0322-51 | Software Incompatibility with Body Control Module Not Programmed | When the forward recognition camera cannot confirm the vehicle specification information based on vehicle specification information sent from the main body ECU (multiplex network body ECU) | Forward recognition camera | Front Recognition Camera | B |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.