Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC U0322-57: Software Incompatibility with Body Control Module Invalid/Incompatible Software Component [12/2024 - ]: Description
Forward recognition camera receives vehicle specification information from the main body ECU (multiplex network body ECU) via CAN communication line. When the vehicle specification information value sent from the main body ECU (multiplex network body ECU) does not match the value stored in the forward recognition camera, the forward recognition camera stores DTC U0322-57.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0322-57 | Software Incompatibility with Body Control Module Invalid/Incompatible Software Component | When the vehicle specification information value sent from main body ECU (multiplex network body ECU) does not match the value stored in the forward recognition camera |
|
Front Recognition Camera | A |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.