SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA20254RUNNER SR5, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSFRONT POWER SEAT CONTROL SYSTEM (W/ MEMORY) - DIAGNOSTIC CODES & SYMPTOM TESTSFRONT POWER SEAT CONTROL SYSTEM (W/ MEMORY)DTC U0100-87: LOST COMMUNICATION WITH ECM/PCM "A" MISSING MESSAGE; DTC U0129-87: LOST COMMUNICATION WITH BRAKE SYSTEM CONTROL MODULE MISSING MESSAGE; DTC U0140-87: LOST COMMUNICATION WITH BODY CONTROL MODULE MISSING MESSAGE; DTC U0163-87: LOST COMMUNICATION WITH NAVIGATION CONTROL MODULE MISSING MESSAGE; DTC U1107-87: LOST COMMUNICATION WITH POWER MANAGEMENT MODULE MISSING MESSAGE; DTC U1115-87: LOST COMMUNICATION WITH TILT & TELESCOPIC MODULE MISSING MESSAGE; DTC U114F-87: LOST COMMUNICATION WITH POWER INTEGRATION MODULE MISSING MESSAGE [12/2024 - ]DESCRIPTION
2025 Toyota 4Runner SR5, 4WD

DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0163-87: Lost Communication with Navigation Control Module Missing Message; DTC U1107-87: Lost Communication with Power Management Module Missing Message; DTC U1115-87: Lost Communication with Tilt & Telescopic Module Missing Message; DTC U114F-87: Lost Communication with Power Integration Module Missing Message [12/2024 - ]: Description

2025 Toyota 4Runner SR5, 4WDSECTION Description

These DTCs are stored if a CAN communication malfunction occurs between the position control ECU assembly LH and other ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U0100-87 Lost Communication With ECM/PCM "A" Missing Message for HEV Model: 
  1. The position control ECU assembly LH does not receive data from the hybrid vehicle control ECU assembly for approximately 10 seconds or more.

for Gasoline Model: 
  1. The position control ECU assembly LH does not receive data from the ECM for approximately 10 seconds or more.
 CAN communication system Driver Seat B
U0129-87 Lost Communication with Brake System Control Module Missing Message for HEV Model: 
  1. The position control ECU assembly LH does not receive data from the No. 2 skid control ECU (brake actuator assembly) for approximately 10 seconds or more.

for Gasoline Model: 
  1. The position control ECU assembly LH does not receive data from the skid control ECU (brake actuator assembly) for approximately 10 seconds or more.
 CAN communication system Driver Seat B
U0140-87 Lost Communication with Body Control Module Missing Message The position control ECU assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system Driver Seat B
U0163-87 Lost Communication with Navigation Control Module Missing Message The position control ECU assembly LH does not receive data from the radio and display receiver assembly for approximately 10 seconds or more. CAN communication system Driver Seat B
U1107-87 Lost Communication with Power Management Module Missing Message The position control ECU assembly LH does not receive data from the certification ECU (smart key ECU assembly) for approximately 10 seconds or more. CAN communication system Driver Seat B
U1115-87 Lost Communication with Tilt & Telescopic Module Missing Message The position control ECU assembly LH does not receive data from the multiplex tilt and telescopic ECU for approximately 10 seconds or more. CAN communication system Driver Seat B
U114F-87 Lost Communication with Power Integration Module Missing Message The position control ECU assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system Driver Seat B
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.