Wireless Systems Function Check [12/2024 - ]: Procedure

1. Use the following customize setting methods to confirm that the smart key system is enabled.
   • Using the GTS
   • Using the multi-display
   • Using manual operation

   Check the customize settings.

   Refer to CUSTOMIZE PARAMETERS [12/2024 - ] 

2. Use the following customize setting methods to confirm that the wireless door lock system is enabled.
   • Using the GTS
   • Using the multi-display

   Check the customize settings.

   Refer to CUSTOMIZE PARAMETERS [12/2024 - ]

   HINT: 

   • Even when the smart key system is disabled by a customize setting, the engine can be started by an emergency key operation.
   • If the smart key system or wireless door lock control system is disabled, all entry and start functions or wireless functions will not operate.

   Result

   Result	Proceed to
   Wireless door lock control system and smart key system are enabled	A
   Smart key system is disabled	B
   Wireless door lock system is disabled	C

Result: 

B 

GO TO CUSTOMIZE PARAMETERS 

Refer to CUSTOMIZE PARAMETERS [12/2024 - ]

Result: 

C 

GO TO CUSTOMIZE PARAMETERS 

Refer to CUSTOMIZE PARAMETERS [12/2024 - ]

Result: 

A 

See step  2

1. Check the power door lock control system.

   Refer to OPERATION CHECK [12/2024 - ]

   Result

   Result	Proceed to
   Power door lock control system operates properly	A
   Power door lock control system does not operate properly	B

Result: 

B 

REFER TO "POWER DOOR LOCK CONTROL SYSTEM" 

Result: 

A 

See step  3

1. Check that there are no problem symptoms applicable to Problem Symptoms Table (Wireless Door Lock Control System).

   Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ]

   HINT: 

   Operation Check: Refer to OPERATION CHECK [12/2024 - ]

   Result

   Result	Proceed to
   No applicable items	A
   Applicable items	B

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE (Wireless Door Lock Control System) 

Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ]

Result: 

A 

See step  4

1. Check that there are no problem symptoms applicable to Problem Symptoms Table (Smart Key System (for Entry Function)).

   Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ]

   HINT: 

   Operation Check: Refer to OPERATION CHECK [12/2024 - ]

   Result

   Result	Proceed to
   No applicable items	A
   Applicable items	B

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE (Smart Key System (for Entry Function)) 

Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ]

Result: 

A 

See step  5

1. Check that there are no problem symptoms applicable to Problem Symptoms Table (Smart Key System (for Start Function)).

   Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ] 

   HINT: 

   Operation Check: Refer to OPERATION CHECK [12/2024 - ] 

   Result

   Result	Proceed to
   No applicable items	A
   Applicable items	B

Result: 

A 

USE SIMULATION METHOD TO CHECK 

Refer to METHOD TO SIMULATE PROBLEM SYMPTOMS [12/2024 - ]

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE (Smart Key System (for Start Function)) 

Refer to PROBLEM SYMPTOMS TABLE [12/2024 - ]