Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA20254RUNNER SR5, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASBLIND SPOT MONITOR SYSTEM - DIAGNOSTIC CODES & CIRCUIT TESTSBLIND SPOT MONITOR SYSTEMDTC U0322-51: SOFTWARE INCOMPATIBILITY WITH BODY CONTROL MODULE NOT PROGRAMMED; DTC U0322-57: SOFTWARE INCOMPATIBILITY WITH BODY CONTROL MODULE INVALID/INCOMPATIBLE SOFTWARE COMPONENT [12/2024 - ]CAUTION / NOTICE / HINT
2025 Toyota 4Runner SR5, 4WD
Caution / Notice / Hint
2025 Toyota 4Runner SR5, 4WDSECTION Caution / Notice / Hint
NOTE:
- When checking for DTCs, make sure that the blind spot monitor system is turned on.
- After replacing the blind spot monitor sensor, be sure to adjust the optical axis of the blind spot monitor sensor and delete the vehicle control history (RoB) of each system.
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
For Gasoline Model:
Refer to REGISTRATION [12/2024 - ]
Except Gasoline Model:
Refer to REGISTRATION [12/2024 - ]
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.