Problem Symptoms Table

2013 Toyota Camry SE, 2.5L Eng VIN FSECTION Problem Symptoms Table

HINT: 

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
OCCUPANT CLASSIFICATION SYSTEM

Symptom Suspected Area Refer to
The front passenger seat condition differs from the indication by the passenger airbag ON/OFF indicator (DTC is not output). Trouble in Passenger Airbag ON/OFF Indicator Refer to Trouble in Passenger Airbag ON/OFF Indicator
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.