Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA2010VENZA AWD V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSOXYGEN SENSOR RELAYTESTING AND INSPECTION
2010 Toyota Venza AWD V6-3.5L (2GR-FE)
Oxygen Sensor Relay: Testing and Inspection
2010 Toyota Venza AWD V6-3.5L (2GR-FE)SECTION Testing and Inspection
POWER DISTRIBUTION: INTEGRATION RELAY: INSPECTION
1. INSPECT INTEGRATION RELAY
(a) Inner circuit (for 2GR-FE)
(1) for EFI MAIN relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(2) for A/F relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(3) for F/PMP relay (for AWD)
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(4) for C/OPN relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(5) for HORN relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(6) for H-LP LO (LH) relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(7) for H-LP LO (RH) relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(8) for H-LP HI (DRL) relay
1 for Halogen headlight
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
1 for HID headlight
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(b) Inner circuit (for 1AR-FE)
(1) for No. 2 EFI MAIN relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(2) for EFI MAIN relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(3) for C/OPN relay
1 Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(4) for HORN relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(5) for H-LP LO (LH) relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(6) for H-LP LO (RH) relay
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
(7) for H-LP HI (DRL) relay
1 for Halogen headlight
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
1 for HID headlight
1 Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration:
HINT
If the result is not as specified, replace the integration relay.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.