Computers and Control Systems

1991 Toyota Supra L6-3.0L DOHC Turbo (7M-GTE)SECTION Computers and Control Systems

7M-GE ENGINE (NON TURBOCHARGED)

Valve Clearance (COLD)
Intake 0.15mm (0.006 in.) - 0.25mm (0.010 in.)
Exhaust 0.20mm (0.008 in.) - 0.30mm (0.012 in.)

Firing Order 1-5-3-6-2-4

Idle Speed 700 rpm [1]
Idle Mixture [1]

[1] Not Adjustable.

TIGHTENING TORQUE SPECIFICATIONS:

Catalyst To Exhaust Pipe Bolts 43 N-m (32 ft.lbs.)
Distributor Hold Down Bolt 14 N-m (10 ft.lbs.)
EGR Cooler Bolts 14 N-m (10 ft.lbs.)


7M-GTE ENGINE (TURBOCHARGED)

Valve Clearance (COLD)
Intake 0.15mm (0.006 in.) - 0.25mm (0.010 in.)
Exhaust 0.20mm (0.008 in.) - 0.30mm (0.012 in.)

Firing Order 1-5-3-6-2-4

Idle Speed 650 rpm [1]
Idle Mixture [1]

[1] Not Adjustable.

TIGHTENING TORQUE SPECIFICATIONS:

Catalyst To Exhaust Pipe Bolts 43 N-m (32 ft.lbs.)
Cam Position Sensor Hold Down Bolt 14 N-m (10 ft.lbs.)
EGR Cooler Bolts 14 N-m (10 ft.lbs.)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.