Master Switch Continuity Inspection (2-Door)

1990 Toyota 4Runner 2D Utility, 3.0 V, StandardSECTION Master Switch Continuity Inspection (2-Door)

Inspect the switch continuity between terminals.

MASTER SWITCH CONTINUITY INSPECTION (2-DOOR) (1)

Switch Position Terminal No. Switch Side
Window Unlock
Up 3 & 9, 4 & 6 Driver's Side
Up 6 & 7, 9 & 10 Passenger's Side
Off 3, 4 & 6 Driver' Side
Off 6, 7 & 10 Passenger's Side
Down 3 & 6, 4 & 9 Driver' Side
Down 7 & 9, 6 & 10 Passenger's Side
Window Lock
Up 3 & 9, 4 & 6 Driver's Side
Up 9 & 10 Passenger's Side
Off 3, 4 & 6 Driver' Side
Off 7 & 10 Passenger's Side
Down 3 & 6, 4 & 9 Driver' Side
Down 7 & 9 Passenger's Side
(1) If continuity is not as specified, replace the switch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.