Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA19904RUNNER 2D UTILITY, 3.0 V, AUTOMATICREPAIR AND DIAGNOSISSTEERINGPOWER STEERINGSTEERING SYSTEM - POWERTORQUE SPECIFICATIONS
1990 Toyota 4Runner 2D Utility, 3.0 V, Automatic
Torque Specifications
1990 Toyota 4Runner 2D Utility, 3.0 V, AutomaticSECTION Torque Specifications
TORQUE SPECIFICATIONS (PICKUP & 4RUNNER)
| Application | Ft. Lbs. (N.m) | ||||
|---|---|---|---|---|---|
| Air Control Valve | 27 (37) | ||||
| End Cover Bolt | 34 (46) | ||||
| Front Housing Bolt | |||||
| 4-Cylinder | 34 (46) | ||||
| Guide Nut | 15 (20) | ||||
| Idler Arm Bracket-to-Frame Bolt | |||||
| Pickup 2WD | 87 (118) | ||||
| Pickup 4WD & 4Runner | 105 (142) | ||||
| Idler Arm-to-Idler Arm Bracket Nut | 58 (79) | ||||
| Idler Arm-to-Relay Rod Nut | 43 (58) | ||||
| Pitman Arm Nut | 130 (176) | ||||
| Power Steering Pump Pulley Nut | 32 (43) | ||||
| Power Steering Pump-to-Bracket Bolt | |||||
| 4-Cylinder | 29 (39) | ||||
| V6 | |||||
| Long Bolt | 43 (58) | ||||
| Short Bolt | 29 (39) | ||||
| Pressure Line Bolt | 33 (45) | ||||
| Pressure Port Union | 51 (69) | ||||
| Reservoir Bolt | |||||
| V6 | |||||
| 12-mm Bolt | (1) | ||||
| 14-mm Bolt | 30 (41) | ||||
| Sector Shaft Adjusting Screw Lock Nut | 34 (46) | ||||
| Steering Damper-to-Bracket Nut | |||||
| Pickup 2WD | (1) | ||||
| Pickup 4WD & 4Runner | 19 (26) | ||||
| Steering Damper-to-Relay Rod Nut | 43 (58) | ||||
| Steering Gear-to-Frame Bolt | |||||
| Pickup 2WD | 87 (118) | ||||
| Pickup 4WD & 4Runner | 105 (142) | ||||
| Steering Knuckle Arm-to-Frame Bolt | |||||
| Pickup 2WD | 80 (109) | ||||
| Pickup 4WD & 4Runner | 135 (183) | ||||
| Steering Shaft Joint-to-Steering Gear Bolt | 26 (35) | ||||
| Tie Rod Clamp Bolt | 19 (26) | ||||
| Tie Rod Nut | 67 (91) | ||||
| Wheel Lug Nut | 76 (103) | ||||
| Worm Gear Valve-to-Housing Bolt | 34 (46) | ||||
| INCH Lbs. (N.m) | |||||
| Bleeder Plug | 69 (8) | ||||
| Solenoid Valve Bolt | 84 (9) | ||||
| Suction Port Bolt | |||||
| 4-Cylinder | 108 (10) | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.