SYS.OK|MANUAL.DB● LIVE
1990 Toyota 4Runner 2D Utility, 2.4 R, Automatic

Quick Lookups: Fluids

1990 Toyota 4Runner 2D Utility, 2.4 R, AutomaticSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 1.69 LBS. 0.76 KG R-12 S
Automatic Transmission Fluid 2.4L Eng,4WD Drain and Refill 1.70 QTS. 1.6 L Automatic Transmission Fluid DEXRON II S
Automatic Transmission Fluid 2.4L Eng,4WD Dry Fill 7.60 QTS. 7.19 L Automatic Transmission Fluid DEXRON II S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front,w/Auto Disconnect Differential 2.00 QTS. 1.89 L API - GL-5, SAE 75W-90 Hypoid Gear Oil S
Differential Gear Oil Front,w/o Auto Disconnect Differential 1.70 QTS. 1.6 L API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) S
Differential Gear Oil Rear 2.30 QTS. 2.17 L API - GL-5, SAE 90W Hypoid Gear Oil (Above 0Deg.F), 80W or 80W-90 (Below 0Deg.F) S
Engine Coolant 2.4L Eng,Automatic Trans w/o Rear Heater 9.60 QTS. 9.08 L 50/50 mixture of Ethylene Glycol Antifreeze and water DO NOT use alcohol type antifreeze or plain water alone. S
Engine Coolant 2.4L Eng,Automatic Trans w/Rear Heater 9.90 QTS. 9.36 L 50/50 mixture of Ethylene Glycol Antifreeze and water DO NOT use alcohol type antifreeze or plain water alone. S
Engine Oil 2.4L Eng Drain and Refill,w/Filter 4.50 QTS. 4.25 L SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) S
Engine Oil 2.4L Eng Drain and Refill,w/o Filter 4.00 QTS. 3.78 L SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) S
Engine Oil 2.4L Eng Dry Fill 5.10 QTS. 4.82 L SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) S
Fuel Tank 17.20 GALS. 65.1 L S
Manual Transmission Fluid 3.20 QTS. 3.02 L API - GL-4 or GL-5, SAE 75W-90 S
Power Steering Fluid N/A N/A Automatic Transmission Fluid DEXRON II S
Transfer Case Fluid 2.4L Eng,4WD,Automatic Trans 1.20 QTS. 1.13 L Multipurpose Gear Oil API - GL-4 or GL-5, SAE 75W-90 S
Windshield Washer Fluid N/A N/A Plain water In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.