Fuel Pump (Fuel Injected)

1990 Toyota 4Runner 2D Utility, 2.4 R, AutomaticSECTION Fuel Pump (Fuel Injected)
FUEL PUMP PERFORMANCE

Application (1) Pressure psi (kg/cm2 ) (2) Pressure psi (kg/cm2 )
Camry & Celica
3S-FE 38-44 (2.7-3.1) 33-37 (2.3-2.6)
3S-GTE 33-38 (2.3-2.7) 27-31 (1.9-2.2)
4A-FE & 5S-FE 38-44 (2.7-3.1) 33-37 (2.3-2.6)
Corolla 38-44 (2.7-3.1) 30-37 (2.1-2.6)
Pickup & 4Runner 38-44 (2.7-3.1) 33-37 (2.3-2.6)
Tercel 38-44 (2.7-3.1) 33-37 (2.3-2.6)
(1) With pressure regulator vacuum hose disconnected and plugged.
(2) With vacuum hose connected to pressure regulator.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.