Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1999ESTEEM GLX SEDAN L4-1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLEFLUID PUMP, A/TSERVICE SPECIFICATIONS
1999 Suzuki Esteem GLX Sedan L4-1.6L
Service Specifications
1999 Suzuki Esteem GLX Sedan L4-1.6LSECTION Service Specifications
Driven gear to Body clearance
Standard 0.075 - 0.15 mm (0.00295 - 0.0059 inch)
Limit 0.3 mm (0.011 inch)
Gear Tip clearance
Standard 0.01 - 0.248 mm (0.00040 - 0.00976 inch)
Limit 0.3 mm (0.011 inch)
Gear to Body Side clearance
Standard 0.02 - 0.05 mm (0.0008 - 0.0019 inch)
Limit 0.1 mm (0.0039 inch)
Standard 0.075 - 0.15 mm (0.00295 - 0.0059 inch)
Limit 0.3 mm (0.011 inch)
Gear Tip clearance
Standard 0.01 - 0.248 mm (0.00040 - 0.00976 inch)
Limit 0.3 mm (0.011 inch)
Gear to Body Side clearance
Standard 0.02 - 0.05 mm (0.0008 - 0.0019 inch)
Limit 0.1 mm (0.0039 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.