Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1999ESTEEM GLX SEDAN L4-1.6LREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLELECTRONIC BRAKE CONTROL MODULESERVICE AND REPAIR
1999 Suzuki Esteem GLX Sedan L4-1.6L
Electronic Brake Control Module: Service and Repair
1999 Suzuki Esteem GLX Sedan L4-1.6LSECTION Service and Repair
REMOVAL
CAUTION: As ABS control module consists of precision parts, be careful not to expose it to excessive shock.
1. Disconnect negative cable from battery.
2. Remove steering column hole cover, knee bolster panel from instrument panel.
3. Remove release lever with latch release cable.
4. Remove junction box.
5. Disconnect ABS control module connectors.
6. Remove two bolts and take out ABS control module.
INSTALLATION
Install it by reversing removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.