Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1999ESTEEM GLX SEDAN L4-1.6LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSENGINE CONTROLS - PASS-THROUGH REPROGRAMMING
1999 Suzuki Esteem GLX Sedan L4-1.6L
Engine Controls - Pass-Through Reprogramming
1999 Suzuki Esteem GLX Sedan L4-1.6LSECTION Engine Controls - Pass-Through Reprogramming
GENERAL
Section Title: General Info
TSB No. TS 04 09086
Division: Automotive
Category: Technical
SUBJECT:
PASS-THRU REPROGRAMMING SOFTWARE VERSION 1.8.0.2
MODEL(S):
ALL
YEAR:
1996~
CONDITION:
A new pass-thru reprogramming software version number 1.8.0.2, must be downloaded and installed prior to downloading and installing the database version 2.006.0728 and any future database versions, unless notified of a change.
CAUSE:
Electronic Control Unit (ECU) damage may occur if the newest database is used with software version 1.6.0.1.
CORRECTION:
Follow the below procedure to check version information in your PC. If you do not have the latest version p1 ease download and install the software and database from Suzuki Pitstop.
The new Pass-Thru Reprogramming Software version 1.8.0.2 must be downloaded prior to downloading the new Database version 2.006.0728. Please check the version currently loaded on your PC by following the below instruction. If you have the latest Pass-Thru Reprogramming (1.8.0.2), no action is required. If you do not have the latest version please download the Software first and install it. Then download the Database and install it.
To check the version of your Pass-Thru Reprogramming Software
1. Open the Suzuki Pass-Thru Reprogramming Tool as if to reprogram a vehicle. Then left click the "P" icon on the top left corner of the screen.
2. Select "About Pass-Thru Reprogramming..."
3. Version information is displayed. If you do not have version 1.8.0.2, you must download the Pass-Thru Reprogramming Software and install it then download the Database and install it.
Disclaimer
Section Title: General Info
TSB No. TS 04 09086
Division: Automotive
Category: Technical
SUBJECT:
PASS-THRU REPROGRAMMING SOFTWARE VERSION 1.8.0.2
MODEL(S):
ALL
YEAR:
1996~
CONDITION:
A new pass-thru reprogramming software version number 1.8.0.2, must be downloaded and installed prior to downloading and installing the database version 2.006.0728 and any future database versions, unless notified of a change.
CAUSE:
Electronic Control Unit (ECU) damage may occur if the newest database is used with software version 1.6.0.1.
CORRECTION:
Follow the below procedure to check version information in your PC. If you do not have the latest version p1 ease download and install the software and database from Suzuki Pitstop.
The new Pass-Thru Reprogramming Software version 1.8.0.2 must be downloaded prior to downloading the new Database version 2.006.0728. Please check the version currently loaded on your PC by following the below instruction. If you have the latest Pass-Thru Reprogramming (1.8.0.2), no action is required. If you do not have the latest version please download the Software first and install it. Then download the Database and install it.
To check the version of your Pass-Thru Reprogramming Software
1. Open the Suzuki Pass-Thru Reprogramming Tool as if to reprogram a vehicle. Then left click the "P" icon on the top left corner of the screen.
2. Select "About Pass-Thru Reprogramming..."
3. Version information is displayed. If you do not have version 1.8.0.2, you must download the Pass-Thru Reprogramming Software and install it then download the Database and install it.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.