Cruise Control Servo Cable: Adjustments

1999 Suzuki Esteem GLX Sedan L4-1.6LSECTION Adjustments
CABLE PLAY ADJUSTMENT




1. Remove actuator cap.
2. With actuator lever returned at original position (Where lever does not move clockwise any further), check cruise cable for play.

Cable play "a" : 1 - 2 mm (0.04 - 0.08 in.)

If it is out of specification, adjust it as follows.

3. Loosen cable lock nut.
4. Adjust cable play to specified value by turning adjusting nut.
5. Tighten lock nut securely after adjustment.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.