Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1999ESTEEM GLX SEDAN L4-1.6LREPAIR AND DIAGNOSISCRUISE CONTROLCLUTCH SWITCHADJUSTMENTS
1999 Suzuki Esteem GLX Sedan L4-1.6L
Clutch Switch: Adjustments
1999 Suzuki Esteem GLX Sedan L4-1.6LSECTION Adjustments
Clutch Pedal Position (CPP) Switch (For Cruise Control)
1. Install CPP switch to pedal bracket.
2. With clutch pedal released, adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.
Clearance "a": 1 .5 - 2.0 mm (0.06 - 0.08 in)
3. Tighten lock nut to specified torque.
Tightening Torque
(a): 7.5 N.m (0.75 kg-m, 5.5 lb-ft)
4. Connect connector to CPP switch securely.
1. Install CPP switch to pedal bracket.
2. With clutch pedal released, adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.
Clearance "a": 1 .5 - 2.0 mm (0.06 - 0.08 in)
3. Tighten lock nut to specified torque.
Tightening Torque
(a): 7.5 N.m (0.75 kg-m, 5.5 lb-ft)
4. Connect connector to CPP switch securely.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.