Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1998ESTEEM GLX SEDAN PLUS L4-1.6LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW REGULATORFRONT DOOR WINDOW REGULATORSERVICE AND REPAIR
1998 Suzuki Esteem GLX Sedan Plus L4-1.6L
Front Door Window Regulator: Service and Repair
1998 Suzuki Esteem GLX Sedan Plus L4-1.6LSECTION Service and Repair
Removal
1. Remove door glass referring to "Front Door Glass Removal and Installation:".
2. Remove window regulator attaching screws (1) (six pcs.). Then, take out regulator through hole (A).
Installation
Reverse removal sequence to install door window regulator noting following the point.
- Apply multi-purpose grease to sliding parts.
1. Remove door glass referring to "Front Door Glass Removal and Installation:".
2. Remove window regulator attaching screws (1) (six pcs.). Then, take out regulator through hole (A).
Installation
Reverse removal sequence to install door window regulator noting following the point.
- Apply multi-purpose grease to sliding parts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.