Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1998ESTEEM GLX SEDAN PLUS L4-1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PUMP, ENGINE
1998 Suzuki Esteem GLX Sedan Plus L4-1.6L
Oil Pump, Engine
1998 Suzuki Esteem GLX Sedan Plus L4-1.6LSECTION Oil Pump, Engine
SPECIFICATIONS
| Service Specifications | |
| Clearance Outer Roter And case | Limit 0.310 MM (0.0122 inch) |
| Side Clearance | Limit 0.15 MM (0.0059 inch) |
| Torque Specifications | |
| Rotor Plate Screws | 11 Nm (8.0 ft. lbs.) |
| Case Bolts | 11 Nm (8.0 ft lbs.) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.