Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1998ESTEEM GLX SEDAN PLUS L4-1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLECASE, A/T
1998 Suzuki Esteem GLX Sedan Plus L4-1.6L
Case, A/T
1998 Suzuki Esteem GLX Sedan Plus L4-1.6LSECTION Case, A/T
Cylindrical Roller Bearing Retainer 13 Nm (1.3 kg-m, 9.5 ft. lbs.)
Lubrication Tube Clamp 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Oil Reservoir Plate 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Rear Cover And Engine Mounting LH Bracket 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Parking Lock Pawl Bracket 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Manual Detent Spring 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Oil Reservoir Plate 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Housing To Transmission Case 30 Nm (3.0 kg-m, 22.0 ft. lbs.)
Transmission Side Cover 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Oil Filler Tube 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Speedometer Driven Gear 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Range Switch Bolts 20 Nm (2.0 kg-m, 14.5 ft. lbs.)
Oil Cooler Pipe Fittings 35 Nm (3.5 kg-m, 25.5 ft. lbs.)
Oil Cooler Pipe Clamp 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Lubrication Tube Clamp 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Oil Reservoir Plate 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Rear Cover And Engine Mounting LH Bracket 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Parking Lock Pawl Bracket 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Manual Detent Spring 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
Oil Reservoir Plate 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Housing To Transmission Case 30 Nm (3.0 kg-m, 22.0 ft. lbs.)
Transmission Side Cover 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
Oil Filler Tube 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Speedometer Driven Gear 5.5 Nm (0.55 kg-m, 4.0 ft. lbs.)
Transmission Range Switch Bolts 20 Nm (2.0 kg-m, 14.5 ft. lbs.)
Oil Cooler Pipe Fittings 35 Nm (3.5 kg-m, 25.5 ft. lbs.)
Oil Cooler Pipe Clamp 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.