Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1998ESTEEM GLX SEDAN PLUS L4-1.6LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTRANSMISSION POSITION SENSOR/SWITCHDESCRIPTION AND OPERATIONPARK/NEUTRAL POSITION SIGNAL (A/T MODEL ONLY)
1998 Suzuki Esteem GLX Sedan Plus L4-1.6L
Park/Neutral Position Signal (A/T Model Only)
1998 Suzuki Esteem GLX Sedan Plus L4-1.6LSECTION Park/Neutral Position Signal (A/T Model Only)
Park/Neutral Position Signal (A/T model only)
This signal is sent from transmission control module as a battery voltage signal only when A/T is in "R," "D," "2" or "L" range. Thus, ECM judges whether A/T is in one of the above range or otherwise (i.e. in "P" or "N" range) and uses it as one of the signals to control the fuel injector, idle air control valve and ignition timing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.