Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI1998ESTEEM GLX SEDAN PLUS L4-1.6LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSSENSORS AND SWITCHES - COMPUTERS AND CONTROL SYSTEMSTHROTTLE POSITION SENSORDESCRIPTION AND OPERATIONTHROTTLE VALVE OPENING SIGNAL OUTPUT FOR A/T
1998 Suzuki Esteem GLX Sedan Plus L4-1.6L
Throttle Valve Opening Signal Output For A/T
1998 Suzuki Esteem GLX Sedan Plus L4-1.6LSECTION Throttle Valve Opening Signal Output For A/T
THROTTLE VALVE OPENING SIGNAL OUTPUT FOR A/T
Receiving the throttle valve opening signal from the throttle position sensor, ECM converts it into the duty signal (voltage signal) and sends it to transmission control module. Then transmission control module uses it as the signal to control the automatic transmission.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.