Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU1998LEGACY OUTBACK SPORT AWD F4-2.2L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSSENSORS AND SWITCHES - COMPUTERS AND CONTROL SYSTEMSCOOLANT TEMPERATURE SENSOR/SWITCH (FOR COMPUTER)SERVICE AND REPAIR
1998 Subaru Legacy Outback Sport AWD F4-2.2L SOHC
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
1998 Subaru Legacy Outback Sport AWD F4-2.2L SOHCSECTION Service and Repair
ENGINE COOLANT TEMPERATURE SENSOR
REMOVAL AND INSTALLATION
1. Remove Air Intake Duct.
2. Disconnect connector from engine coolant temperature sensor.
3. Remove Engine coolant temperature sensor.
4. Installation is in the reverse order of removal.
Tightening Torque: 25 ± 3 N.m (18.1 ± 2.2 ft-lb).
REMOVAL AND INSTALLATION
1. Remove Air Intake Duct.
2. Disconnect connector from engine coolant temperature sensor.
3. Remove Engine coolant temperature sensor.
4. Installation is in the reverse order of removal.
Tightening Torque: 25 ± 3 N.m (18.1 ± 2.2 ft-lb).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.