Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU1996LEGACY WAGON 4WD F4-2.2L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSENGINECOMPRESSION CHECK
1996 Subaru Legacy Wagon 4WD F4-2.2L SOHC
Compression Check
1996 Subaru Legacy Wagon 4WD F4-2.2L SOHCSECTION Compression Check
Compression (350 rpm and fully open throttle):
Standard: 1,079 - 1,275 kPa (11.0 - 13.0 kg/cm2, 156 - 185 psi)
Limit: 883 kPa (9.0 kg/cm2, 128 psi)
Difference between cylinders: 196 kPa (2.0 kg/cm2, 28 psi), or less
Standard: 1,079 - 1,275 kPa (11.0 - 13.0 kg/cm2, 156 - 185 psi)
Limit: 883 kPa (9.0 kg/cm2, 128 psi)
Difference between cylinders: 196 kPa (2.0 kg/cm2, 28 psi), or less
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.