Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU1996LEGACY WAGON 4WD F4-2.2L SOHCREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSERVICE AND REPAIR7. STEERING ANGLE
1996 Subaru Legacy Wagon 4WD F4-2.2L SOHC
7. Steering Angle
1996 Subaru Legacy Wagon 4WD F4-2.2L SOHCSECTION 7. Steering Angle
7. STEERING ANGLE
- Inspection
1) Place vehicle on a turning radius gauge.
2) While depressing brake pedal, turn steering wheel fully to the left and right. With steering wheel held at each fully turned position, measure both the inner and outer wheel steering angle.
Steering angle:
Inner wheel 37.60 ± 1.50
Outer wheel 32.60 ± 1.50
- Adjustment
Turn tie-rod to adjust steering angle of both inner and outer wheels.
CAUTION:
- Check toe-in.
- Correct boot if it is twisted.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.