Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU1990XT-6 4WD L6-2.7L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSTHROTTLE POSITION SENSOR
1990 Subaru XT-6 4WD L6-2.7L SOHC
Throttle Position Sensor
1990 Subaru XT-6 4WD L6-2.7L SOHCSECTION Throttle Position Sensor
IGNITION TIMING SPECIFICATIONS
Manual transmission 20° /750 rpm
Automatic transmission 20° /750 rpm
Firing order 1-6-3-2-5-4
RESISTANCE SPECIFICATIONS
Air flow meter:
Between terminals B and BR and ground 10 ohms max.
Between power terminal R and ground 10V min.
Voltage across terminals W and BR 1-2V
Bypass air control valve Terminal 1 - 2 9.5-11.5 K ohms
Bypass air control valve Terminal 2 - 3 8.5-10.5 K ohms
Canister purge solenoid 32.7-39.9 ohms
Coolant temperature sensor:
20° C (68° F) 2-3K ohms
50° C (122° F) 700-1000 ohms
Fuel injectors Approx. 13.8 ohms
Throttle sensor:
Between terminals 1 and 4 3-7 K ohms
Between terminals 2 and 4 4.2-15 K ohms (throttle closed)
Between terminals 2 and 4 0.1-11 K ohms (throttle open)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.