Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSMART2009FORTWO BRABUS COUPE (451.333) L3-1.0L (132.930)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSINFORMATION BUSLOCATIONS
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)
Information Bus: Locations
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)SECTION Locations
GF00.19-P-0001-01MCU Overall Network (GVN), Location Of Components
A1 Instrument cluster
A15p4 Tachometer (for code (V31) Cockpit clock and tachometer package)
B24/15 Turn rate and lateral acceleration sensor
B32 ATA [EDW] ultrasonic sensor (for code (V01) Anti-theft alarm system (FFO))
B38 Rain sensor/light sensor (for code (V54) Rain/light sensor)
H3/2 Alarm signal siren with inclination sensor (for code (V01) Anti-theft alarm system (FFO))
N2/7 Restraint systems control unit
N3/10 ME-SFI [ME] control unit
N10/10 SAM control unit
N15/5 Electronic selector lever module control unit
N15/6 Automated manual transmission control unit
N23 Heater/air conditioning operating unit (for code (I01) Air conditioning Plus)
N47-5 ESP control unit
N49 Steering angle sensor
N68 Steering assist control unit (for code (V26) Power steering, EPS (FFO))
N88 TPM [RDK] control unit
N110 Weight Sensing System (WSS) control unit
X11/4 Data link connector
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.