Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSMART2009FORTWO BRABUS COUPE (451.333) L3-1.0L (132.930)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSDATA LINK CONNECTORDESCRIPTION AND OPERATION
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)
Data Link Connector: Description and Operation
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)SECTION Description and Operation
GF54.22-P-2200MCC Data Link Connector Component Description
Shown on LHD model
X11/4 Data link connector
Location
The data link connector is located in the footwell on the driver-side.
Task
The data link connector is the interface for the connection of STAR DIAGNOSIS to the Controller Area Network (data bus/CAN bus) (CAN).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.