SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSMART2009FORTWO BRABUS COUPE (451.333) L3-1.0L (132.930)REPAIR AND DIAGNOSISBODY AND FRAMEFRAMESUBFRAMEFRONT SUBFRAMESERVICE AND REPAIRAR33.10-P-0100MCC REMOVE/INSTALL FRONT AXLE
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)

AR33.10-P-0100MCC Remove/Install Front Axle

2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)SECTION AR33.10-P-0100MCC Remove/Install Front Axle


AR33.10-P-0100MCC Remove/Install Front Axle








1 Screw
2 Brake caliper
3 Screw
4 Bracket
5 Nut
6 Steering coupling
7 Screw
8 Rack-and-pinion steering
9 Front axle carrier
10 Bolts
B23x1 Power steering torque sensor connector (with code (V26) Power steering, EPS (FFO))
L6/1 Left front rpm sensor
L6/2 Right front rpm sensor
M19x1 Power steering connector (with code (V26) Power steering, EPS (FFO))
W30/2 Ground; power steering pump noise suppression (with code (V26) Power steering, EPS (FFO))







14 Nut
15 Retaining device
16 Open end wrench










































129 589 01 21 00, Holding device







450 589 01 01 00, Open end wrench







450 589 02 62 00, Removal assembly







450 589 08 99 00, Assembly tool set







451 589 00 63 00, Holding device
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.