Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSMART2009FORTWO BRABUS COUPE (451.333) L3-1.0L (132.930)REPAIR AND DIAGNOSISBODY AND FRAMEFRAMESUBFRAMEFRONT SUBFRAMESERVICE AND REPAIRAR33.10-P-0001MCC REMOVE/INSTALL FRONT AXLE CARRIER
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)
AR33.10-P-0001MCC Remove/Install Front Axle Carrier
2009 Smart ForTwo BRABUS Coupe (451.333) L3-1.0L (132.930)SECTION AR33.10-P-0001MCC Remove/Install Front Axle Carrier
AR33.10-P-0001MCC Remove/Install Front Axle Carrier
1 Front axle carrier
2 Nut
3 Retaining clamp
4 Stabilizer
5 Rubber bushing
6 Front bulkhead
7 Brake line
8 Link rod
9 Screw
10 Screw
11 Transverse control arms
12 Bolts
13 Reinforcements
L6/1x1 Rpm sensor connector
450 589 02 62 00, Removal assembly
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.