Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2002SL1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLELECTRONIC BRAKE CONTROL MODULESERVICE AND REPAIRMID-RAIL BRACKET
2002 Saturn SL1 L4-1.9L SOHC VIN 8
Mid-Rail Bracket
2002 Saturn SL1 L4-1.9L SOHC VIN 8SECTION Mid-Rail Bracket
MID-RAIL BRACKET
REMOVAL
1. Remove ABS control assembly.
2. Remove bolts securing bracket to mid-rail.
INSTALLATION
1. Align bracket to mid-rail, then install and torque bolts.
Torque: ABS Control Assembly Brackets Bolts: 16 Nm (12 ft. lbs.)
2. Install ABS control assembly.
REMOVAL
1. Remove ABS control assembly.
2. Remove bolts securing bracket to mid-rail.
INSTALLATION
1. Align bracket to mid-rail, then install and torque bolts.
Torque: ABS Control Assembly Brackets Bolts: 16 Nm (12 ft. lbs.)
2. Install ABS control assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.