Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2002SL1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISCRUISE CONTROLDESCRIPTION AND OPERATIONCRUISE CONTROL SWITCH FUNCTIONSTAP UP FEATURE
2002 Saturn SL1 L4-1.9L SOHC VIN 8
Tap Up Feature
2002 Saturn SL1 L4-1.9L SOHC VIN 8SECTION Tap Up Feature
The desired set speed is adjusted up by momentarily depressing the RES/ACCEL switch. This is the TAP UP feature. To be considered a valid TAP UP request, the RES/ACCEL switch must be pressed between 0.06 and 1 second. Pressing the RES/ACCEL switch longer than 0.7 seconds will be considered an accelerate command. Each press of the RES/ACCEL switch (which is determined to be a valid TAP UP request) will cause the desired set speed to be increased by one mile per hour. Holding the RES/ACCEL longer than 1.4 seconds results in a new set speed upon release of the button.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.