Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN2002SL1 L4-1.9L SOHC VIN 8REPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSBODY CONTROL MODULEDESCRIPTION AND OPERATIONHORN
2002 Saturn SL1 L4-1.9L SOHC VIN 8
Horn
2002 Saturn SL1 L4-1.9L SOHC VIN 8SECTION Horn
The BCM controls the operation of the horns for the security system and Remote Keyless Entry (RKE) functions. Circuit 28 is grounded by the BCM when horn operation is desired. Normal operation of the horn is performed by the horn switch grounding the horn relay and is not controlled by the BCM.
There is a 30 second delay prior to setting DTC 2752 - Horn Relay Coil Circuit Low for grounded circuit conditions. It is possible to set DTC 2752 if the horn is operated by the horn switch for greater than 30 seconds
There is a 30 second delay prior to setting DTC 2752 - Horn Relay Coil Circuit Low for grounded circuit conditions. It is possible to set DTC 2752 if the horn is operated by the horn switch for greater than 30 seconds
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.