Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSATURN1996SC2 L4-1.9L DOHC VIN 7REPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSKEYLESS ENTRY/SECURITY SYSTEM - INFORMATION
1996 Saturn SC2 L4-1.9L DOHC VIN 7
Keyless Entry/Security System - Information
1996 Saturn SC2 L4-1.9L DOHC VIN 7SECTION Keyless Entry/Security System - Information
BULLETIN NO.: 97-T-44
ISSUE DATE: November, 1997
GROUP/SEQ. NO.: Electrical - 11
CORPORATION NO.: 788210
SUBJECT:
Information on New RKE/SSS Module for Vehicles Equipped with 10 Remote Keyless Entry/Saturn Security System (RKE/SSS)
MODELS AFFECTED:
1991-1997 Saturns equipped with Retailer installed Saturn security system (SSS) or 1997 Saturns equipped with factory installed remote keyless entry/Saturn security system (RKE/SSS) (AU0).
IMPORTANT:
This bulletin does not affect 1996 Saturns equipped with factory installed RKE.
PURPOSE:
A new RKE/SSS module (P/N 21024608) is released for servicing the above mentioned vehicles. If RKE/SSS module (P/N 21024608) is installed on these vehicles, additional program modes will he available. (Refer to the information on programming the Saturn security system.)
PROGRAMMING THE SATURN SECURITY SYSTEM
IMPORTANT:
The following information is for 1997 production vehicles equipped with factory installed RKE/SSS or 1991-1997 vehicles with Retailer installed Sautrn security systems. The Saturn security system can be programmed to any of the following modes; however, unless otherwise requested by the customer, the Saturn security system should be programmed to mode 1. If the customer requests the passive arming feature to be enabled, use mode 5.
IMPORTANT:
The module will be shipped with two pocket information cards and one owners manual page addendum indicating the optional mode selections and operating procedures. Forward this information to the vehicle owner.
PARTS REQUIREMENTS:
1997 Production vehicles equipped with factory installed RKE/SSS or 1991-1997 vehicles equipped with Retailer installed SSS
21024608 Module Asm-R/Con Dr Lk Rcvr
ISSUE DATE: November, 1997
GROUP/SEQ. NO.: Electrical - 11
CORPORATION NO.: 788210
SUBJECT:
Information on New RKE/SSS Module for Vehicles Equipped with 10 Remote Keyless Entry/Saturn Security System (RKE/SSS)
MODELS AFFECTED:
1991-1997 Saturns equipped with Retailer installed Saturn security system (SSS) or 1997 Saturns equipped with factory installed remote keyless entry/Saturn security system (RKE/SSS) (AU0).
IMPORTANT:
This bulletin does not affect 1996 Saturns equipped with factory installed RKE.
PURPOSE:
A new RKE/SSS module (P/N 21024608) is released for servicing the above mentioned vehicles. If RKE/SSS module (P/N 21024608) is installed on these vehicles, additional program modes will he available. (Refer to the information on programming the Saturn security system.)
PROGRAMMING THE SATURN SECURITY SYSTEM
IMPORTANT:
The following information is for 1997 production vehicles equipped with factory installed RKE/SSS or 1991-1997 vehicles with Retailer installed Sautrn security systems. The Saturn security system can be programmed to any of the following modes; however, unless otherwise requested by the customer, the Saturn security system should be programmed to mode 1. If the customer requests the passive arming feature to be enabled, use mode 5.
IMPORTANT:
The module will be shipped with two pocket information cards and one owners manual page addendum indicating the optional mode selections and operating procedures. Forward this information to the vehicle owner.
PARTS REQUIREMENTS:
1997 Production vehicles equipped with factory installed RKE/SSS or 1991-1997 vehicles equipped with Retailer installed SSS
21024608 Module Asm-R/Con Dr Lk Rcvr
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.