Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20049-5 LINEAR (9600) L4-2.3L TURBO (2.3T)REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINTRANSMISSION CONTROL SYSTEMSRELAYS AND MODULES - TRANSMISSION AND DRIVETRAINRELAYS AND MODULES - A/TCONTROL MODULEAPPLICATION AND ID
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)
Control Module: Application and ID
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)SECTION Application and ID
Control Module
Type Designation
The type designation for the transmission control module consists of two codes each made up of two groups of characters as in the following example: WBEA 000011 and 2 07 respectively.
First code
W = Control module model, e.g. for engine bay
B = Hardware type
E = Engine type according to: E=D223L, F=B205E, G=B235E, H=B235R, I=B308E
D = Design version. Updated on change
000011 = Serial number
Second code
02 = Year of manufacture (02 = 2001)
07 = Week of manufacture (calendar week)
Type Designation
The type designation for the transmission control module consists of two codes each made up of two groups of characters as in the following example: WBEA 000011 and 2 07 respectively.
First code
W = Control module model, e.g. for engine bay
B = Hardware type
E = Engine type according to: E=D223L, F=B205E, G=B235E, H=B235R, I=B308E
D = Design version. Updated on change
000011 = Serial number
Second code
02 = Year of manufacture (02 = 2001)
07 = Week of manufacture (calendar week)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.