Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20049-5 LINEAR (9600) L4-2.3L TURBO (2.3T)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSOLAR SENSORSERVICE AND REPAIR
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)
Solar Sensor: Service and Repair
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)SECTION Service and Repair
Solar Sensor
To remove
1. Remove the cover with solar sensor (A) by pushing it forward.
2. Unplug the connector for the sensor (B).
3. Undo the sensor from the cover by pressing in and turning.
To fit
1. Refit the sensor to the cover (B) by pressing and turning.
NOTE: The connector must always be to the right (also for RHD).
2. Plug in the connector for the sensor.
3. Fit the cover with solar sensor (A) by pushing it backward.
NOTE: The connector must always be to the right (also for RHD).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.