Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20049-5 LINEAR (9600) L4-2.3L TURBO (2.3T)REPAIR AND DIAGNOSISBODY AND FRAMERELAYS AND MODULES - BODY AND FRAMEPOWER SEAT CONTROL MODULESERVICE AND REPAIR
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)
Power Seat Control Module: Service and Repair
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)SECTION Service and Repair
PSM Control Module
To remove
1. Remove the front seat and tilt it back.
2. Unplug 3 connectors (A) from the control module.
3. Unscrew the control module from the bracket, 2 screws (B).
To fit
1. Screw the control module into the bracket, 2 screws (B).
2. Plug in 3 connectors (A) for the control module.
3. Fit the front seat.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.