SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20049-5 LINEAR (9600) L4-2.3L TURBO (2.3T)REPAIR AND DIAGNOSISBODY AND FRAMERELAYS AND MODULES - BODY AND FRAMEPOWER MIRROR CONTROL MODULESERVICE AND REPAIR
2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)

Power Mirror Control Module: Service and Repair

2004 Saab 9-5 Linear (9600) L4-2.3L Turbo (2.3t)SECTION Service and Repair


Control Module, PMM

To remove

IMPORTANT:
- ESD-SENSITIVE COMPONENT
- Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read "Before changing a control module" before changing a control module.







1. Remove the glove box.
2. Remove the air duct.
3. Unhook the control module from the plastic clip.
4. Unplug the connector.

To fit

IMPORTANT:
- ESD-SENSITIVE COMPONENT
- Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read "Before changing a control module" before changing a control module.

1. Plug in the connector.
2. Fit the control module.
3. Fit the air duct.
4. Fit the glove box.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.