Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20009-3 CONVERTIBLE (9400) L4-2.0L TURBO (B205)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSYSTEM SPECIFICATIONSFRONT
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)
Front
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)SECTION Front
Front Wheels
| Outside Diameter | 288 mm |
| Thickness (new) | 25 mm |
| Maximum refacing depth/side | 1.0 mm |
| Minimum permissable thickness after grindeing | 23.5 mm |
| Maximum Runout (fitted | 0.08 mm |
| Maximum variation of thickness | 0.015 mm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.