Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20009-3 CONVERTIBLE (9400) L4-2.0L TURBO (B205)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONSTECHNICAL SPECIFICATION
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)
Technical Specification
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)SECTION Technical Specification
AF 20/22 4-spd A/T, Type Designation:
AF 20/22 4-spd A/T, Second Group Designation Cont.:
AF 20/22 4-spd A/T, Third Group Designation Cont.:
AF 20/22 4-spd A/T, Shifting Points:
AF 20/22 4-spd A/T, Shifting Points Conts.:
AF 20/22 4-spd A/T, Gear Ratio:
AF 20/22 4-spd A/T, Lubricant Capacity:
AF 20/22 4-spd A/T, Gear Speed To Tire Ratio:
AF 20/22 4-spd A/T, Settings:
AF 20/22 4-spd A/T, Fluid Temp. Sensor:
AF 20/22 4-spd A/T, Lever Position Sensor:
AF 20/22 4-spd A/T, Input Shaft Speed Sensor:
AF 20/22 4-spd A/T, Output Shaft Speed Sensor:
AF 20/22 4-spd A/T, Shifting Solenoid Valve (S1 & S2):
AF 20/22 4-spd A/T, Lock Up Solenoid Valve (SL):
AF 20/22 4-spd A/T, Pressure Control Solenoid Valve (ST):
AF 20/22 4-spd A/T, Control Module Designation:
AF 20/22 4-spd, Control Module Readings:
AF 20/22 4-spd, Control Module Readings Cont.:
AF 20/22 4-spd, Control Module Readings Cont.:
AF 20/22 4-spd, Control Module Readings Cont.:
AF 20/22 4-spd, Control Module Readings Cont.:
AF 20/22 4-spd, Control Module Reading Cont.:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.